Template:Infobox chlorine Chlorine (Template:IPAEng, from the Greek word 'χλωρóς' (khlôros) meaning 'green'), is the chemical element with atomic number 17 and symbol Cl. It is a halogen, found in the periodic table in group VII (formerly VIIa or VIIb). As the chloride ion, which is part of common salt and other compounds, it is abundant in nature and necessary to most forms of life, including humans. In its common elemental form (Cl2 or "dichlorine") under standard conditions, it is a pale green gas about 2.5 times as dense as air. It has a disagreeable, suffocating odor that is detectable in concentrations as low as 3.5 ppm and is poisonous. Chlorine is a powerful oxidant and is used in bleaching and disinfectants. As a common disinfectant, chlorine compounds are used in swimming pools to keep them clean and sanitary. In the upper atmosphere, chlorine-containing molecules have been implicated in the destruction of the ozone layer.
Chlorine gas is diatomic, with the formula Cl2. It combines readily with all elements except O2 and N2 and the noble gases. Compounds with oxygen, nitrogen, and xenon are known but do not form by direct reaction of the elements. Chlorine, though very reactive, is not as extremely reactive as fluorine. Pure chlorine gas does, however, support combustion of organic compounds such as hydrocarbons, although the carbon component tends to burn incompletely, with much of it remaining as soot. At 10 °C and atmospheric pressure, one liter of water dissolves 3.10 L of gaseous chlorine, and at 30°C, 1 L of water dissolves only 1.77 liters of chlorine.
This element is a member of the salt-forming halogen series and is extracted from chlorides through oxidation often by electrolysis. As the chloride ion, Cl−, it is also the most abundant dissolved ion in ocean water.
Chlorine has isotopes with mass numbers ranging from 32 to 40. There are two principal stable isotopes, 35Cl (75.77%) and 37Cl (24.23%), giving chlorine atoms in bulk an apparent atomic weight of 35.4527 g/mol.
Trace amounts of radioactive 36Cl exist in the environment, in a ratio of about 7x10−13 to 1 with stable isotopes. 36Cl is produced in the atmosphere by spallation of 36Ar by interactions with cosmic ray protons. In the subsurface environment, 36Cl is generated primarily as a result of neutron capture by 35Cl or muon capture by 40Ca. 36Cl decays to 36S and to 36Ar, with a combined half-life of 308,000 years. The half-life of this hydrophilic nonreactive isotope makes it suitable for geologic dating in the range of 60,000 to 1 million years. Additionally, large amounts of 36Cl were produced by irradiation of seawater during atmospheric detonations of nuclear weapons between 1952 and 1958. The residence time of 36Cl in the atmosphere is about 1 week. Thus, as an event marker of 1950s water in soil and ground water, 36Cl is also useful for dating waters less than 50 years before the present. 36Cl has seen use in other areas of the geological sciences, including dating ice and sediments.
- See also Halide minerals.
In nature, chlorine is found primarily as the chloride ion, a component of the salt that is deposited in the earth or dissolved in the oceans — about 1.9% of the mass of seawater is chloride ions. Even higher concentrations of chloride are found in the Dead Sea and in underground brine deposits. Most chloride salts are soluble in water, thus, chloride-containing minerals are usually only found in abundance in dry climates or deep underground. Common chloride minerals include halite (sodium chloride), sylvite (potassium chloride), and carnallite (potassium magnesium chloride hexahydrate). Over 2000 naturally-occurring organic chlorine compounds are known.
Industrially, elemental chlorine is usually produced by the electrolysis of sodium chloride dissolved in water. Along with chlorine, this chloralkali process yields hydrogen gas and sodium hydroxide, according to the following chemical equation:
Chlorine can be manufactured by electrolysis of a sodium chloride solution (brine). The production of chlorine results in the co-products caustic soda (sodium hydroxide, NaOH) and hydrogen gas (H2). These two products, as well as chlorine itself, are highly reactive. Chlorine can also be produced by the electrolysis of a solution of potassium chloride, in which case the co-products are hydrogen and caustic potash (potassium hydroxide). There are three industrial methods for the extraction of chlorine by electrolysis of chloride solutions, all proceeding according to the following equations:
- Cathode: 2 H+ (aq) + 2 e− → H2 (g)
- Anode: 2 Cl− (aq) → Cl2 (g) + 2 e−
Overall process: 2 NaCl (or KCl) + 2 H2O → Cl2 + H2 + 2 NaOH (or KOH)
- Mercury cell electrolysis
Mercury cell electrolysis, also known as the Castner-Kellner process, was the first method used at the end of the nineteenth century to produce chlorine on an industrial scale. The "rocking" cells used have been improved over the years. Today, in the "primary cell", titanium anodes (formerly graphite ones) are placed in a sodium (or potassium) chloride solution flowing over a liquid mercury cathode. When a potential difference is applied and current flows, chlorine is released at the titanium anode and sodium (or potassium) dissolves in the mercury cathode forming an amalgam. This flows continuously into a separate reactor ("denuder" or "secondary cell"), where it is usually converted back to mercury by reaction with water, producing hydrogen and sodium (or potassium) hydroxide at a commercially useful concentration (50% by weight). The mercury is then recycled to the primary cell.
It is estimated that there are still around 100 mercury-cell plants operating worldwide. In Japan, mercury-based chloralkali production was virtually phased out by 1987 (except for the last two potassium chloride units shut down in 2003). In the United States, there will be only five mercury plants remaining in operation by the end of 2008. In Europe, mercury cells accounted for 43% of capacity in 2006 and Western European producers have committed to closing or converting all remaining chloralkali mercury plants by 2020.
- Diaphragm cell electrolysis
In diaphragm cell electrolysis, an asbestos (or polymer-fiber) diaphragm separates a cathode and an anode, preventing the chlorine forming at the anode from re-mixing with the sodium hydroxide and the hydrogen formed at the cathode. This technology was also developed at the end of the nineteenth century. There are several variants of this process: the Le Sueur cell (1893), the Hargreaves-Bird cell (1901), the Gibbs cell (1908), and the Townsend cell (1904). The cells vary in construction and placement of the diaphragm, with some having the diaphragm in direct contact with the cathode.
The salt solution (brine) is continuously fed to the anode compartment and flows through the diaphragm to the cathode compartment, where the caustic alkali is produced and the brine is partially depleted.
As a result, diaphragm methods produce alkali that is quite dilute (about 12%) and of lower purity than do mercury cell methods. But diaphragm cells are not burdened with the problem of preventing mercury discharge into the environment. They also operate at a lower voltage, resulting in an energy savings over the mercury cell method, but large amounts of steam are required if the caustic has to be evaporated to the commercial concentration of 50%.
- Membrane cell electrolysis
Development of this technology began in the 1970s. The electrolysis cell is divided into two "rooms" by a cation permeable membrane acting as an ion exchanger. Saturated sodium (or potassium) chloride solution is passed through the anode compartment, leaving at a lower concentration. Sodium (or potassium) hydroxide solution is circulated through the cathode compartment, exiting at a higher concentration. A portion of the concentrated sodium hydroxide solution leaving the cell is diverted as product, while the remainder is diluted with deionized water and passed through the electrolysis apparatus again.
- Other electrolytic processes
Although a much lower production scale is involved, electrolytic diaphragm and membrane technologies are also used industrially to recover chlorine from hydrochloric acid solutions, producing hydrogen (but no caustic alkali) as a co-product.
- 4 HCl + O2 → 2 Cl2 + 2 H2O
This reaction is accomplished with the use of copper(II) chloride (CuCl2) as a catalyst and is performed at high temperature (about 400 °C). The amount of extracted chlorine is approximately 80%. Due to the extremely corrosive reaction mixture, industrial use of this method is difficult and several pilot trials failed in the past. Nevertheless, recent developments are promising. Recently Sumitomo patented a catalyst for the Deacon process using ruthenium(IV) oxide (RuO2).
- 2 NaCl + 2H2SO4 + MnO2 → Na2SO4 + MnSO4 + 2 H2O + Cl2
Small amounts of chlorine gas can be made in the laboratory by putting concentrated hydrochloric acid in a flask with a side arm and rubber tubing attached. Manganese dioxide is then added and the flask stoppered. The reaction is not greatly exothermic. As chlorine is denser than air, it can be easily collected by placing the tube inside a flask where it will displace the air. Once full, the collecting flask can be stoppered.
Large-scale production of chlorine involves several steps and many pieces of equipment. The description below is typical of a membrane plant. The plant also simultaneously produces sodium hydroxide (caustic soda) and hydrogen gas. A typical plant consists of brine production/treatment, cell operations, chlorine cooling & drying, chlorine compression & liquefaction, liquid chlorine storage & loading, caustic handling, evaporation, storage & loading and hydrogen handling.
Key to the production of chlorine is the operation of the brine saturation/treatment system. Maintaining a properly saturated solution with the correct purity is vital, especially for membrane cells. Many plants have a salt pile which is sprayed with recycled brine. Others have slurry tanks that are fed raw salt.
The raw brine is partially or totally treated with sodium hydroxide, sodium carbonate and a flocculant to reduce calcium, magnesium and other impurities. The brine proceeds to a large clarifier or a filter where the impurities are removed. The total brine is additionally filtered before entering ion exchangers to further remove impurities. At several points in this process, the brine is tested for hardness and strength.
After the ion exchangers, the brine is considered pure, and is transferred to storage tanks to be pumped into the cell room. Brine, fed to the cell line, is heated to the correct temperature to control exit brine temperatures according to the electrical load. Brine exiting the cell room must be treated to remove residual chlorine and control pH levels before being returned to the saturation stage. This can be accomplished via dechlorination towers with acid and sodium bisulfite addition. Failure to remove chlorine can result in damage to the cells. Brine should be monitored for accumulation of bothchlorate anions and sulfate anions, and either have a treatment system in place, or purging of the brine loop to maintain safe levels, since chlorate anions can diffuse through the membranes and contaminate the caustic, while sulfate anions can damage the anode surface coating.
- Cell room
The building that houses the many electrolytic cells is usually called a cell room or cell house, although some plants are built outdoors. This building contains support structures for the cells, connections for supplying electrical power to the cells and piping for the fluids. Monitoring and control of the temperatures of the feed caustic and brine is done to control exit temperatures. Also monitored are the voltages of each cell which vary with the electrical load on the cell room that is used to control the rate of production. Monitoring and control of the pressures in the chlorine and hydrogen headers is also done via pressure control valves.
Direct current is supplied via a rectified power source. Plant load is controlled by varying the current to the cells. As the current is increased, flow rates for brine and caustic and deionized water are increased, while lowering the feed temperatures.
- Cooling and drying
Chlorine gas exiting the cell line must be cooled and dried since the exit gas can be over 80°C and contains moisture that allows chlorine gas to be corrosive to iron piping. Cooling the gas allows for a large amount of moisture from the brine to condense out of the gas stream. Cooling also improves the efficiency of both the compression and the liquefaction stage that follows. Chlorine exiting is ideally between 18°C and 25°C. After cooling the gas stream passes through a series of towers with counter flowing sulfuric acid. These towers progressively remove any remaining moisture from the chlorine gas. After exiting the drying towers the chlorine is filtered to remove any remaining sulfuric acid.
- Compression and liquefaction
Several methods of compression may be used: liquid ring, reciprocating, or centrifugal. The chlorine gas is compressed at this stage and may be further cooled by inter- and after-coolers. After compression it flows to the liquefiers, where it is cooled enough to liquefy. Non condensible gases and remaining chlorine gas are vented off as part of the pressure control of the liquefaction systems. These gases are routed to a gas scrubber, producing sodium hypochlorite, or used in the production of hydrochloric acid (by combustion with hydrogen) or ethylene dichloride (by reaction with ethylene).
- Storage and loading
Liquid chlorine is typically gravity-fed to storage tanks. It can be loaded into rail or road tankers via pumps or padded with compressed dry gas.
- Caustic handling, evaporation, storage and loading
Caustic, fed to the cell room flows in a loop that is simultaneously bled off to storage with a part diluted with deionized water and returned to the cell line for strengthening within the cells. The caustic exiting the cell line must be monitored for strength, to maintain safe concentrations. Too strong or too weak a solution may damage the membranes. Membrane cells typically produce caustic in the range of 30% to 33% by weight. The feed caustic flow is heated at low electrical loads to control its exit temperature. Higher loads require the caustic to be cooled, to maintain correct exit temperatures. The caustic exiting to storage is pulled from a storage tank and may be diluted for sale to customers who require weak caustic or for use on site. Another stream may be pumped into a multiple effect evaporator set to produce commercial 50% caustic. Rail cars and tanker trucks are loaded at loading stations via pumps.
- Hydrogen handling
Hydrogen produced may be vented unprocessed directly to the atmosphere or cooled, compressed and dried for use in other processes on site or sold to a customer via pipeline, cylinders or trucks. Some possible uses include the manufacture of hydrochloric acid or hydrogen peroxide, as well as desulfurization of petroleum oils, or use as a fuel in boilers or fuel cells. In Porsgrunn the byproduct is used for the hydrogen fueling station at hynor.
- Energy consumption
Production of chlorine is extremely energy intensive. Energy consumption per unit weight of product is not far below that for iron and steel manufacture and greater than for the production of glass or cement.
Since electricity is an indispensable raw material for the production of chlorine, the energy consumption corresponding to the electrochemical reaction cannot be reduced. Energy savings arise primarily through applying more efficient technologies and reducing ancillary energy use.
- See also Chlorine compounds
For general references to the chloride ion (Cl−), including references to specific chlorides, see chloride. For other chlorine compounds see chlorate (ClO3−), chlorite (ClO2−), hypochlorite(ClO−), and perchlorate(ClO4−), and chloramine (NH2Cl).
Other chlorine-containing compounds include:
- Fluorides: chlorine monofluoride (ClF), chlorine trifluoride (ClF3), chlorine pentafluoride (ClF5)
- Oxides: chlorine dioxide (ClO2), dichlorine monoxide (Cl2O), dichlorine heptoxide (Cl2O7)
- Acids: hydrochloric acid (HCl), chloric acid (HClO3), and perchloric acid (HClO4)
|−1||chlorides||Cl−||ionic chlorides, organic chlorides, hydrochloric acid|
|+1||hypochlorites||ClO−||sodium hypochlorite, calcium hypochlorite|
|+5||chlorates||ClO3−||sodium chlorate, potassium chlorate, chloric acid|
|+7||perchlorates||ClO4−||potassium perchlorate, perchloric acid,magnesium perchlorate|
organic perchlorates, ammonium perchlorate
Chlorine exists in all odd numbered oxidation states from −1 to +7, as well as the elemental state of zero. Progressing through the states, hydrochloric acid can be oxidized using manganese dioxide, or hydrogen chloride gas oxidized catalytically by air to form elemental chlorine gas. The solubility of chlorine in water is increased if the water contains dissolved alkali hydroxide. This is due to disproportionation:
- Cl2 + 2OH− → Cl− + ClO− + H2O
In hot concentrated alkali solution disproportionation continues:
- 2ClO− → Cl− + ClO2−
- ClO− + ClO2− → Cl− + ClO3−
- 4ClO3− → Cl− + 3ClO4−
Cl− + 2OH− → ClO− + H2O + 2e− +0.89 volts ClO− + 2OH− → ClO2− + H2O + 2e− +0.67 volts ClO2− + 2OH− → ClO3− + H2O + 2e− +0.33 volts ClO3− + 2OH− → ClO4− + H2O + 2e− +0.35 volts
Each step is accompanied at the cathode by
- 2H2O + 2e− → 2OH− + H2 −0.83 volts
Applications and uses
Production of industrial and consumer products
Chlorine's principal applications are in the production of a wide range of industrial and consumer products.  For example, it is used in making plastics, solvents for dry cleaning and metal degreasing, textiles, agrochemicals and pharmaceuticals, insecticides, dyestuffs, etc.
Purification and disinfection
Chlorine is an important chemical for water purification, in disinfectants, and in bleach. It is used (in the form of hypochlorous acid) to kill bacteria and other microbes in drinking water supplies and public swimming pools. However, in most private swimming pools chlorine itself is not used, but rather sodium hypochlorite (household bleach), formed from chlorine and sodium hydroxide, or solid tablets of chlorinated isocyanurates. Even small water supplies are now routinely chlorinated. (See also chlorination)
Elemental chlorine is an oxidizer. It undergoes halogen substitution reactions with lower halide salts. For example, chlorine gas bubbled through a solution of bromide or iodide anions oxidizes them to bromine and iodine respectively.
Like the other halogens, chlorine participates in free-radical substitution reactions with hydrogen-containing organic compounds. This reaction is often – but not invariably – non-regioselective, and hence may result in a mixture of isomeric products. It is often difficult to control the degree of substitution as well, so multiple substitutions are common. If the different reaction products are easily separated, e.g. by distillation, substitutive free-radical chlorination (in some cases accompanied by concurrent thermal dehydrochlorination) may be a useful synthetic route. Industrial examples of this are the production of methyl chloride, methylene chloride, chloroform and carbon tetrachloride from methane, allyl chloride from propylene, and trichloroethylene and tetrachloroethylene from 1,2-dichloroethane.
Like the other halides, chlorine undergoes electrophilic additions reactions, most notably, the chlorination of alkenes and aromatic compounds with a Lewis acid catalyst. Organic chlorine compounds tend to be less reactive in nucleophilic substitution reactions than the corresponding bromine or iodine derivatives, but they tend to be cheaper. They may be activated for reaction by substituting with a tosylate group, or by the use of a catalytic amount of sodium iodide.
Chlorine is used extensively in organic and inorganic chemistry as an oxidizing agent and in substitution reactions because chlorine often imparts many desired properties to an organic compound, due to its electronegativity.
Chlorine compounds are used as intermediates in the production of a number of important commercial products that do not contain chlorine. Examples are: polycarbonates, polyurethanes, silicones, polytetrafluoroethylene, carboxymethyl cellulose and propylene oxide.
Use as a weapon
- World War I
Chlorine gas, also known as bertholite, was first used as a weapon in World War I by Germany on April 22, 1915 in the Second Battle of Ypres. As described by the soldiers it had a distinctive smell of a mixture between pepper and pineapple. It also tasted metallic and stung the back of the throat and chest. Chlorine can react with water in the mucosa of the lungs to form hydrochloric acid, an irritant which can be lethal. The damage done by chlorine gas can be prevented by a gas mask which makes the deaths by chlorine gas much lower then those of other chemical weapons. It was pioneered by a German scientist later to be a Nobel laureate, Fritz Haber of the Kaiser Wilhelm Institute in Berlin, in collaboration with the German chemical conglomerate IG Farben, who developed methods for discharging chlorine gas against an entrenched enemy. It is alleged that Haber's role in the use of chlorine as a deadly weapon drove his wife, Clara Immerwahr, to suicide. After its first use, chlorine was utilized by both sides as a chemical weapon, but it was soon replaced by the more deadly gases phosgene and mustard gas.
- Iraq War
Chlorine gas has also been used by insurgents in the Iraq War as a chemical weapon to terrorize the local population and coalition forces. On March 17, 2007, for example, three chlorine filled trucks were detonated in the Anbar province killing 2 and sickening over 350. Other chlorine bomb attacks resulted in higher death tolls, with more than 30 deaths on two separate occasions. Most of the deaths were caused by the force of the explosions rather than the effects of chlorine, since the toxic gas is readily dispersed and diluted in the atmosphere by the blast. The Iraqi authorities have tightened up security for chlorine, which is essential for providing safe drinking water for the population.
Chlorine is used in the manufacture of numerous organic chlorine compounds, the most significant of which in terms of production volume are 1,2-dichloroethane and vinyl chloride, intermediates in the production of PVC. Other particularly important organochlorines are methyl chloride, methylene chloride, chloroform, vinylidene chloride, trichloroethylene, perchloroethylene, allyl chloride, epichlorohydrin, chlorobenzene, dichlorobenzenes and trichlorobenzenes.
Chlorine was discovered in 1774 by Swedish chemist Carl Wilhelm Scheele, who called it dephlogisticated marine acid (see phlogiston theory) and mistakenly thought it contained oxygen. Scheele isolated chlorine by reacting MnO2 with HCl.
- 4 HCl + MnO2 → MnCl2 + 2 H2O + Cl2
Scheele observed several of the properties of chlorine. The bleaching effect on litmus and the deadly effect on insects additional to the yellow green colour and the smell similar to aqua regia. Chlorine was given its current name in 1810 by Sir Humphry Davy, who insisted that it was in fact an element.
File:Skull and crossbones.svg Chlorine is a toxic gas that irritates the respiratory system. Because it is heavier than air, it tends to accumulate at the bottom of poorly ventilated spaces. Chlorine gas is a strong oxidizer, which may react with flammable materials.
Chlorine is detectable in concentrations of as low as 3.5 to 4 ppm. About 1000 ppm can be fatal after a few deep breaths of the gas. Breathing lower concentrations can aggravate the respiratory system, and exposure to the gas can irritate the eyes.
Never use ABC Dry Chemical to fight a chlorine fire, the resulting chemical reaction with the ammonium phosphate will release toxic gases and/or result in an explosion. Water fogs or CAFS should be used to extinguish the material.
The number of people allergic to chlorine is very small. People who are allergic to chlorine cannot drink tap water, bathe in tap water or swim in pools. Dechlorinating bath salts are used to neutralize the chlorine in bath water. Otherwise, fresh water is boiled and cooled.
The element is widely used for purifying water owing to its powerful oxidising properties, especially potable water supplies and water used in swimming pools. However, some polymers are sensitive to attack, including acetal resin and polybutene. Both materials were used in hot and cold water domestic supplies, and stress corrosion cracking cause widespread failures in the USA in the 1980's and 90's. One example shows an acetal joint in a water supply system, which when it fractured, caused substantial physical damage to computers in the labs below the supply. The cracks started at injection moulding defects in the joint and grew slowly until finally triggered. The fracture surface shows iron and calcium salts which were deposited in the leaking joint from the water supply before failure
- Merck Index of Chemicals and Drugs, 9th ed., monograph 2065
- "WebElements.com – Chlorine". Mark Winter [The University of Sheffield and WebElements Ltd, UK]. Retrieved 2007-03-17.
- Merck Index of Chemicals and Drugs, 9th ed.
- Lange's Handbook of Chemistry, 10th ed
- "Risk assessment and the cycling of natural organochlorines" (PDF). Euro Chlor. Retrieved 2007-08-12.
- Pauling, Linus, General Chemistry, 1970 ed., Dover publications
- "Electrolytic Processes for Chlorine and Caustic Soda". Lenntech Water treatment & air purification Holding B.V., Rotterdamseweg 402 M, 2629 HH Delft, The Netherlands. Retrieved 2007-03-17.
- "Mercury cell". Euro Chlor. Retrieved 2007-08-15.
- "Regional Awareness-raising Workshop on Mercury Pollution" (PDF). UNEP. Retrieved 2007-10-28.
- "Diaphragm cell". Euro Chlor. Retrieved 2007-08-15.
- "The Electrolysis of Brine". Salt Manufacturers' Association. Retrieved 2007-03-17.
- Kiefer, David M. "When the Industry Charged Ahead". Chemistry Chronicles. Retrieved 2007-03-17.
- "Membrane cell". Euro Chlor. Retrieved 2007-08-15.
- J. Catal. 255, 29 (2008)
- "The Chlorine Industry". Lenntech Water treatment & air purification Holding B.V., Rotterdamseweg 402 M, 2629 HH Delft, The Netherlands. Retrieved 2007-03-17.
- "Integrated Pollution Prevention and Control (IPPC) - Reference Document on Best Available Techniques in the Chlor-Alkali Manufacturing Industry". European Commission. Retrieved 2007-09-02.
- "Integrated Pollution Prevention and Control (IPPC) - Best Available Techniques Reference Document on the Production of Iron and Steel". European Commission. Retrieved 2007-09-02.
- "Integrated Pollution Prevention and Control (IPPC) - Reference Document on Best Available Techniques in the Glass Manufacturing Industry". European Commission. Retrieved 2007-09-02.
- "Integrated Pollution Prevention and Control (IPPC) - Reference Document on Best Available Techniques in the Cement and Lime Manufacturing Industries". European Commission. Retrieved 2007-09-02.
- "Chlorine compounds of the month". Euro Chlor. Retrieved 2007-08-29.
- Cotton, F. Albert and Wilkinson, Geoffrey, Advanced Inorganic Chemistry 2nd ed. John Wiley & sons, p568
- "Uses". Euro Chlor. Retrieved 2007-08-20.
- "Chlorine Tree". Chlorine Tree. Retrieved 2007-08-20.
- "Chlorine". Los Alamos National Laboratory. Retrieved 2007-03-17.
- "Weapons of War: Poison Gas". First World War.com. Retrieved 2007-08-12.
- Mahdi, Basim (2007-03-17). "Iraq gas attack makes hundreds ill". CNN. Retrieved 2007-03-17.
- "'Chlorine bomb' hits Iraq village". BBC News. 2007-05-17. Retrieved 2007-05-17.
- "Chlorine." MSDS. Issued on October 23, 1997; Revised on November 1, 1999; Retrieved on September 8, 2007.
|Wikimedia Commons has media related to Chlorine.|
|40x40px||Look up chlorine in Wiktionary, the free dictionary.|
- Chlorine Institute - Trade association and lobby group representing the interests of the chlorine industry
- Chlorine Online - Chlorine Online is an information resource produced by Eurochlor - the business association of the European chlor-alkali industry
- Computational Chemistry Wiki
- Chlorine Production Using Mercury, Environmental Considerations and Alternatives
- National Pollutant Inventory - Chlorine
- National Institute for Occupational Safety and Health - Chlorine Page
af:Chloor ar:كلور ast:Cloru az:Xlor bn:ক্লোরিন be:Хлор bs:Hlor bg:Хлор ca:Clor cv:Хлор cs:Chlór co:Cloru cy:Clorin da:Klor de:Chlor et:Kloor el:Χλώριο eo:Kloro eu:Kloro fa:کلر fur:Clôr ga:Clóirín gv:Cloreen gl:Cloro ko:염소 (원소) hy:Քլոր hi:क्लोरीन hr:Klor io:Kloro id:Klor is:Klór it:Cloro he:כלור sw:Chlorini ht:Klò la:Chlorum lv:Hlors lb:Chlor lt:Chloras ln:Koloki jbo:kliru hu:Klór mk:Хлор ml:ക്ലോറിന് mi:Hau māota ms:Klorin nl:Chloor no:Klor nn:Klor nov:Klore oc:Clòr uz:Xlor nds:Chlor qu:Kluru sq:Klori simple:Chlorine sk:Chlór sl:Klor sr:Хлор sh:Hlor stq:Chlor fi:Kloori sv:Klor ta:குளோரின் th:คลอรีน tg:Хлор uk:Хлор zh-yue:氯 bat-smg:Chluors