Water softening

Jump to: navigation, search

WikiDoc Resources for Water softening

Articles

Most recent articles on Water softening

Most cited articles on Water softening

Review articles on Water softening

Articles on Water softening in N Eng J Med, Lancet, BMJ

Media

Powerpoint slides on Water softening

Images of Water softening

Photos of Water softening

Podcasts & MP3s on Water softening

Videos on Water softening

Evidence Based Medicine

Cochrane Collaboration on Water softening

Bandolier on Water softening

TRIP on Water softening

Clinical Trials

Ongoing Trials on Water softening at Clinical Trials.gov

Trial results on Water softening

Clinical Trials on Water softening at Google

Guidelines / Policies / Govt

US National Guidelines Clearinghouse on Water softening

NICE Guidance on Water softening

NHS PRODIGY Guidance

FDA on Water softening

CDC on Water softening

Books

Books on Water softening

News

Water softening in the news

Be alerted to news on Water softening

News trends on Water softening

Commentary

Blogs on Water softening

Definitions

Definitions of Water softening

Patient Resources / Community

Patient resources on Water softening

Discussion groups on Water softening

Patient Handouts on Water softening

Directions to Hospitals Treating Water softening

Risk calculators and risk factors for Water softening

Healthcare Provider Resources

Symptoms of Water softening

Causes & Risk Factors for Water softening

Diagnostic studies for Water softening

Treatment of Water softening

Continuing Medical Education (CME)

CME Programs on Water softening

International

Water softening en Espanol

Water softening en Francais

Business

Water softening in the Marketplace

Patents on Water softening

Experimental / Informatics

List of terms related to Water softening


A water softener reduces the dissolved calcium, magnesium, and to some degree manganese and ferrous iron ion concentration in hard water. (A common water softener is sodium carbonate; formula Template:SodiumTemplate:Carbonate.)

These "hardness ions" cause three major kinds of undesired effects. Most visibly, metal ions react with soaps and calcium-sensitive detergents, hindering their ability to lather and forming a precipitate—the familiar "bathtub ring". Presence of "hardness ions" also inhibits the cleaning effect of detergent formulations.

Second, calcium and magnesium carbonates tend to precipitate out as hard deposits to the surfaces of pipes and heat exchanger surfaces. This is principally caused by thermal decomposition of bi-carbonate ions but also happens to some extent even in the absence of such ions. The resulting build-up of scale can restrict water flow in pipes. In boilers, the deposits act as an insulation that impairs the flow of heat into water, reducing the heating efficiency and allowing the metal boiler components to overheat. In a pressurized system, this can lead to failure of the boiler.[1]

Third, the presence of ions in an electrolyte, in this case, hard water, can also lead to galvanic corrosion, in which one metal will preferentially corrode when in contact with another type of metal, when both are in contact with an electrolyte. However the sodium (or potassium) ions released during conventional water softening are much more electrolytically active than the calcium or magnesium ions that they replace and galvanic corrosion would be expected to be substantially increased by water softening and not decreased. Similarly if any lead plumbing is in use, softened water is likely to be substantially more plumbo-solvent than hard water.

Ion-exchange resin devices

Conventional water-softening devices intended for household use depend on an ion-exchange resin in which "hardness" ions trade places with sodium ions that are electrostatically bound to the anionic functional groups of the polymeric resin. A class of minerals called zeolites also exhibits ion-exchange properties; these minerals were widely used in earlier water softeners. Water softeners may be desirable when the source of water is a well, whether municipal or private.

How it works

The water to be treated passes through a bed of the resin. Negatively-charged resins absorb and bind metal ions, which are positively charged. The resins initially contain univalent hydrogen, sodium or potassium ions, which exchange with divalent calcium and magnesium ions in the water. As the water passes through the resin column, the hardness ions replace the hydrogen, sodium or potassium ions which are released into the water. The "harder" the water, the more hydrogen, sodium or potassium ions are released from the resin and into the water.

Resins are also available to remove carbonate, bi-carbonate and sulphate ions which are absorbed and hydroxyl ions released from the resin. Both types of resin may be provided in a single water softener.

Regeneration

As these resins become loaded with undesirable cations and anions they gradually lose their effectiveness and must be regenerated. If a cationic resin is used (to remove calcium and magnesium ions) then regeneration is usually effected by passing a concentrated brine, usually of sodium chloride or potassium chloride, or hydrochloric acid solution through them.

For anionic resins a solution of sodium or potassium hydroxide (lye) is used. Most of the salts used for regeneration gets flushed out of the system and may be released into the soil or sewer. These processes can be damaging to the environment, especially in arid regions.[citation needed] Some jurisdictions prohibit such release and require users to dispose of the spent brine at an approved site or to use a commercial service company. Most water softener manufacturers provide metered control valves to minimize the frequency of regeneration. It is also possible on most units to adjust the amount of reagent used for each regeneration. Both of these steps are recommended to minimize the impact of water softeners on the environment and conserve on reagent use.[citation needed] Using acid to regenerate lowers the pH of the regeneration waste.

In industrial scale water softening plants, the effluent flow from re-generation process can be very significant. Under certain conditions, such as when the effluent is discharged in admixture with domestic sewage, the calcium and magnesium salts may precipitate out as hardness scale on the inside of the discharge pipe. This can build up to such an extent so as to block the pipe as happened to a major chlor-alkali plant on the south Wales coast in the 1980s.[citation needed]

If potassium chloride is used the same exchange process takes place except that potassium is exchanged for the calcium, magnesium and iron instead of sodium. This is a more expensive option and may be unsuited for people on potassium-restricted diets.

Effects of sodium

For people on a low-sodium diet, the increase in sodium levels (for systems releasing sodium) in the water can be significant, especially when treating very hard water. A paper by Kansas State University gives an example: "A person who drinks two litres (2L) of softened, extremely hard water (assume 30 gpg) will consume about 480 mg more sodium (2L x 30 gpg x 8 mg/L/gpg = 480 mg), than if unsoftened water is consumed." This is a significant amount, as they state: "The American Heart Association (AHA) suggests that the 3 percent of the population who must follow a severe, salt-restricted diet should not consume more than 400 mg of sodium a day. AHA suggests that no more than 10 percent of this sodium intake should come from water. The EPA’s draft guideline of 20 mg/L for water protects people who are most susceptible."[2] Most people who are concerned with the added sodium in the water generally have one tap (US: faucet) in the house that bypasses the softener, or have a reverse osmosis unit installed for the drinking water and cooking water, which was designed for desalinisation of sea water.

Chelating agents

Chelators are used in chemical analysis, as water softeners, and are ingredients in many commercial products such as shampoos and food preservatives. Citric acid is used to soften water in soaps and laundry detergents. A commonly used synthetic chelator is EDTA.

See also

References

  1. Stephen Lower. "Hard water and water softening". Retrieved 2007-10-08.
  2. Michael H. Bradshaw, G. Morgan Powell. "Sodium in Drinking Water" (PDF). Kansas State University. Retrieved 2007-04-03.

External links

cs:Změkčování vody de:Wasserenthärtung it:Addolcitore he:ריכוך מים nl:Waterontharder uk:Пом'якшення води



Linked-in.jpg