# Atomic mass

(Redirected from Atomic weight)

Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]

The atomic mass (ma) is the mass of an atom at rest, most often expressed in unified atomic mass units.[1] The atomic mass may be considered to be the total mass of protons, neutrons and electrons in a single atom (when the atom is motionless). The atomic mass is sometimes incorrectly used as a synonym of relative atomic mass, average atomic mass and atomic weight; however, these differ subtly from the atomic mass. The atomic mass is defined as the mass of an atom, which can only be one isotope at a time and is not an abundance-weighted average. The actual numerical difference is usually very small such that it does not affect most bulk calculations but such an error can be critical when considering individual atoms.

The relative atomic mass (Ar) (also known as atomic weight and average atomic mass) is the average of the atomic masses of all the chemical element's isotopes as found in a particular environment, weighted by isotopic abundance.[2] This is frequently used as a synonym for the standard atomic weight and is not incorrect to do so since the standard atomic weights are relative atomic masses, although it is less specific to do so. Relative atomic mass also refers to non-terrestrial environments and highly specific terrestrial environments that deviate from the average or have different certainties (number of significant figures) than the standard atomic weights.

The standard atomic weight refers to the mean relative atomic mass of an element in the local environment of the Earth's crust and atmosphere as determined by the IUPAC Commission on Atomic Weights and Isotopic Abundances.[3] These are what are included in a standard periodic table and is what is used in most bulk calculations. An uncertainty in brackets is included which often reflects natural variability in isotopic distribution rather than uncertainty in measurement.[4] For synthetic elements the isotope formed depends on the means of synthesis, so the concept of natural isotope abundance has no meaning. Therefore, for synthetic elements the total nucleon count of the most stable isotope (ie, the isotope with the longest half-life) is listed in brackets in place of the standard atomic weight. Lithium represents a unique case where the natural abundances of the isotopes have been perturbed by human activities to the point of affecting the uncertainty in its standard atomic weight, even in samples obtained from natural sources such as rivers.

The relative isotopic mass is the relative mass of the isotope, scaled with carbon-12 as exactly 12. No other isotopes have whole number masses due to the different mass of neutrons and protons, as well as loss/gain of mass to binding energy. However, since mass defect due to binding energy is minimal compared to the mass of a nucleon, rounding the atomic mass of an isotope tells you the total nucleon count. Neutron count can then be derived by subtracting the atomic number.

## Mass defects in atomic masses

The pattern in the amounts the atomic masses deviate from their mass numbers is as follows: the deviation starts positive at hydrogen-1, becomes negative until a minimum is reached at iron-56, iron-58 and nickel-62, then increases to positive values in the heavy isotopes, with increasing atomic number. This corresponds to the following: nuclear fission in an element heavier than iron produces energy, and fission in any element lighter than iron requires energy. The opposite is true of nuclear fusion reactions: fusion in elements lighter than iron produces energy, and fusion in elements heavier than iron requires energy.

## Measurement of atomic masses

Direct comparison and measurement of the masses of atoms is achieved with mass spectrometry.

## Conversion factor between atomic mass units and grams

The standard scientific unit for dealing with atoms in macroscopic quantities is the mole (mol), which is defined arbitrarily as the amount of a substance with as many atoms or other units as there are in 12 grams of the carbon isotope C-12. The number of atoms in a mole is called Avogadro's number, the value of which is approximately 6.022 × 10Template:Smsup. One mole of a substance always contains almost exactly the relative atomic mass or molar mass of that substance (which is the concept of molar mass), expressed in grams; however, this is almost never true for the atomic mass. For example, the standard atomic weight of iron is 55.847 g/mol, and therefore one mole of iron as commonly found on earth has a mass of 55.847 grams. The atomic mass of an 56Fe isotope is 55.935 u and one mole of 56Fe will in theory weigh 55.935g, but such amounts of pure 56Fe has never existed.

The formulaic conversion between atomic mass and SI mass in grams for a single atom is:

${\displaystyle m_{\rm {grams}}={m_{\rm {u}} \over N_{A}}}$

where ${\displaystyle {\rm {u}}}$ is the atomic mass unit and ${\displaystyle N_{A}}$ is Avogadro's number.

## Relationship between atomic and molecular masses

Similar definitions apply to molecules. One can compute the molecular mass of a compound by adding the atomic masses of its constituent atoms (nuclides). One can compute the molar mass of a compound by adding the relative atomic masses of the elements given in the chemical formula. In both cases the multiplicity of the atoms (the number of times it occurs) must be taken into account, usually by multiplication of each unique mass by its multiplicity.

## History

Before the 1960s, this was expressed so that the oxygen-16 isotope received the atomic weight 16, however, the proportions of oxygen-17 and oxygen-18 present in natural oxygen, which were also used to calculate atomic mass led to two different tables of atomic mass.

Formerly chemists and physicists used two different atomic mass scales. The chemists used a scale such that the natural mixture of oxygen isotopes had an atomic mass 16, while the physicists assigned the same number 16 to the atomic mass of the most common oxygen isotope (containing eight protons and eight neutrons). The unified scale based on carbon-12, 12C, met the physicists' need to base the scale on a pure isotope, while being numerically close to the old chemists' scale.

The term atomic weight is being phased out slowly and being replaced by relative atomic mass, in most current usage. The history of this shift in nomenclature reaches back to the 1960's and has been the source of much debate in the scientific community. The debate was largely created by the adoption of the unified atomic mass unit and the realization that weight was in some ways an inappropriate term. The argument for keeping the term "atomic weight" was primarily that it was a well understood term to those in the field, that the term "atomic mass" was already in use (as it is currently defined) and that the term "relative atomic mass" was in some ways redundant. In 1979, in a compromise move, the definition was refined and the term "relative atomic mass" was introduced as a secondary synonym. Twenty years later the primacy of these synonyms was reversed and the term "relative atomic mass" is now the preferred term; however the "standard atomic weights" have maintained the same name. [5]

## Table of standard atomic weights

Group → 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
↓ Period
1 H
1.008

He
4.003
2 Li
6.941
Be
9.012

B
10.81
C
12.01
N
14.01
O
16.00
F
19.00
Ne
20.18
3 Na
22.99
Mg
24.31

Al
26.98
Si
28.09
P
30.97
S
32.07
Cl
35.45
Ar
39.95
4 K
39.10
Ca
40.08
Sc
44.96
Ti
47.87
V
50.94
Cr
52.00
Mn
54.94
Fe
55.84
Co
58.93
Ni
58.69
Cu
63.55
Zn
65.39
Ga
69.72
Ge
72.61
As
74.92
Se
78.96
Br
79.90
Kr
83.80
5 Rb
85.47
Sr
87.62
Y
88.91
Zr
91.22
Nb
92.91
Mo
95.94
Tc
[99]
Ru
101.07
Rh
102.91
Pd
106.42
Ag
107.87
Cd
112.41
In
114.82
Sn
118.71
Sb
121.76
Te
127.60
I
126.90
Xe
131.29
6 Cs
132.91
Ba
137.33
*
Hf
178.49
Ta
180.95
W
183.84
Re
186.21
Os
190.23
Ir
192.22
Pt
195.08
Au
196.97
Hg
200.59
Tl
204.38
Pb
207.2
Bi
208.98
Po
[209]
At
[210]
Rn
[222]
7 Fr
[223]
Ra
[226]
**
Rf
[263]
Db
[262]
Sg
[266]
Bh
[264]
Hs
[269]
Mt
[268]
Ds
[272]
Rg
[272]
Uub
[277]
Uut
[284]
Uuq
[289]
Uup
[288]
Uuh
[292]
Uus
[291]‡
Uuo
[293]‡

* Lanthanides La
138.91
Ce
140.12
Pr
140.91
Nd
144.24
Pm
[145]
Sm
150.36
Eu
151.96
Gd
157.25
Tb
158.93
Dy
162.50
Ho
164.93
Er
167.26
Tm
168.93
Yb
173.04
Lu
174.97
** Actinides Ac
[227]
Th
232.04
Pa
231.04
U
238.03
Np
[237]
Pu
[244]
Am
[243]
Cm
[247]
Bk
[247]
Cf
[251]
Es
[252]
Fm
[257]
Md
[258]
No
[259]
Lr
[262]
Atomic number colors show state at standard temperature and pressure (0 °C and 1 atm)
Solids Liquids Gases
 Primordial From decay Synthetic Undiscovered